TUdatalib : 2021

Am 2. und 3. Juni erfolgt ein TUdatalib Upgrade auf eine neue Softwareversion. Während dieses Zeitraums steht das System nicht zur Verfügung. Weitere Informationen unter https://www.ulb.tu-darmstadt.de/die_bibliothek/aktuelles/news/news_details_80768.de.jsp. // A TUdatalib upgrade to a new software version is scheduled for June 2nd and 3rd. The system will not be available during that period. Please see https://www.ulb.tu-darmstadt.de/die_bibliothek/aktuelles/news/news_details_80768.en.jsp for further information.

Browse by

Titles Authors Type By Submit Date Subjects DFG subject classifications

Collections in this community

Recent Submissions

VBA-Routine for the Automation of High-Troughput Process Simulation

Hungsberg, Maximilian (2023)
Figure 5: Electrochemical properties of GDEs with varying catalyst loadings.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S5: EIS data at vayring current density

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure 2: Determination of the ECSA in RDE and GDE measurements

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure 3: Influence of the solvent composition of the catalyst ink

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S11: Influence of the GDL type on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in O2 in 2 M HClO4.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure 7: Influence of the electrolyte concentration on A) CVs in N2-atmosphere at 100 mV s-1 and B) the resulting ECSA (derived from H+- + CO-Stripping) for GDEs with a loading of 100 µgPt cm-2.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure 8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in synthetic air.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S4: ORR current density at a potential of 0.85 V vs. RHE of GDEs prepared with catalyst ink containing a varying percentage of ethanol in the water/ethanol solvent mixture

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S10: Influence of the electrolyte concentration on the potential of the utilized reversible hydrogen reference electrodes.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure 4: Temperature evolution of the cell electrolyte during application of ORR protocol 6a and ORR protocol 6b

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S9: Influence of the electrolyte concentration on the measured potentials (relating to the ORR activity) for GDEs with a loading of 100 µgPt cm-2 for low and high current densities in O2 (lA)) and synthetic air (B)).

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure 6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured in 2 M HClO4 in O2-atmosphere by application of protocol 6b

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S7: Mass specific ORR activity determined by interpolation out of the recorded polarization curves shown in Figure 6 in O2-atmosphere depending on the catalyst loading.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured by application of protocol 6a.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
Figure S8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2. A) influence on CV curves in O2-atmosphere. B) influence on the limiting current in O2 and synthetic air derived from the plateau of the respective CV curves.

Schmitt, Nicolai; Schmidt, Mareike; Hübner, Gerold; Etzold, Bastian J.M. (2022-04-25)
NH3-TPD of Iron molybdate catalysts

Oefner, Niklas; Heck, Franziska; Dürl, Marcel; Schumacher, Leon; Siddiqui, Humera; Kramm, Ulrike; Hess, Christian; Möller, Angela; Albert, Barbara; Etzold, Bastian (2021-10)
Direct scale-up of rotating disc electrode (RDE) experiments for CO2 reduction

Kolle-Görgen, Eva; Etzold, Bastian J. M. (2021-10-25)
Distribution of European plastic waste composition

Hungsberg, Maximilian (2020)
XPS Data of iron molybdate catalysts

Oefner, Niklas; Heck, Franziska; Dürl, Marcel; Schumacher, Leon; Siddiqui, Humera Khatoon; Kramm, Ulrike I.; Hess, Christian; Möller, Angela; Albert, Barbara; Etzold, Bastian J.M. (2021-07-15)

2021

Browse by

Collections in this community

Automated High-Throughput Process Simulation for Process Tolerance Analysis [2]

Data of publication "Activity, selectivity and initial degradation of iron molybdate in the oxidative dehydrogenation of ethanol" [7]

Data of publication "Ionic Liquid Modified Electrocatalysts: a STEM-EDX Approach for Identification of Local Distributions within Ionomer Containing Catalysts Layers" [4]

Data of publication “Oxygen Reduction Reaction Measurements on Platinum Electrocatalysts in Gas Diffusion Electrode Half-cells: Influence of Electrode Preparation, Measurement Protocols and Common Pitfalls” [15]

Direct scale-up of rotating disc electrode (RDE) experiments for CO2 reduction [1]

Recent Submissions

VBA-Routine for the Automation of High-Troughput Process Simulation

Figure 5: Electrochemical properties of GDEs with varying catalyst loadings.

Figure S5: EIS data at vayring current density

Figure 2: Determination of the ECSA in RDE and GDE measurements

Figure 3: Influence of the solvent composition of the catalyst ink

Figure S11: Influence of the GDL type on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in O2 in 2 M HClO4.

Figure 7: Influence of the electrolyte concentration on A) CVs in N2-atmosphere at 100 mV s-1 and B) the resulting ECSA (derived from H+- + CO-Stripping) for GDEs with a loading of 100 µgPt cm-2.

Figure 8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in synthetic air.

Figure S4: ORR current density at a potential of 0.85 V vs. RHE of GDEs prepared with catalyst ink containing a varying percentage of ethanol in the water/ethanol solvent mixture

Figure S10: Influence of the electrolyte concentration on the potential of the utilized reversible hydrogen reference electrodes.

Figure 4: Temperature evolution of the cell electrolyte during application of ORR protocol 6a and ORR protocol 6b

Figure S9: Influence of the electrolyte concentration on the measured potentials (relating to the ORR activity) for GDEs with a loading of 100 µgPt cm-2 for low and high current densities in O2 (lA)) and synthetic air (B)).

Figure 6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured in 2 M HClO4 in O2-atmosphere by application of protocol 6b

Figure S7: Mass specific ORR activity determined by interpolation out of the recorded polarization curves shown in Figure 6 in O2-atmosphere depending on the catalyst loading.

Figure S6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured by application of protocol 6a.

Figure S8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2. A) influence on CV curves in O2-atmosphere. B) influence on the limiting current in O2 and synthetic air derived from the plateau of the respective CV curves.

NH3-TPD of Iron molybdate catalysts

Direct scale-up of rotating disc electrode (RDE) experiments for CO2 reduction

Distribution of European plastic waste composition

XPS Data of iron molybdate catalysts

2021

Browse by

Collections in this community

Automated High-Throughput Process Simulation for Process Tolerance Analysis [2]

Data of publication "Activity, selectivity and initial degradation of iron molybdate in the oxidative dehydrogenation of ethanol" [7]

Data of publication "Ionic Liquid Modified Electrocatalysts: a STEM-EDX Approach for Identification of Local Distributions within Ionomer Containing Catalysts Layers" [4]

Data of publication “Oxygen Reduction Reaction Measurements on Platinum Electrocatalysts in Gas Diffusion Electrode Half-cells: Influence of Electrode Preparation, Measurement Protocols and Common Pitfalls” [15]

Direct scale-up of rotating disc electrode (RDE) experiments for CO2 reduction [1]

Recent Submissions

VBA-Routine for the Automation of High-Troughput Process Simulation ﻿

Figure 5: Electrochemical properties of GDEs with varying catalyst loadings. ﻿

Figure S5: EIS data at vayring current density ﻿

Figure 2: Determination of the ECSA in RDE and GDE measurements ﻿

Figure 3: Influence of the solvent composition of the catalyst ink ﻿

Figure S11: Influence of the GDL type on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in O2 in 2 M HClO4. ﻿

Figure 7: Influence of the electrolyte concentration on A) CVs in N2-atmosphere at 100 mV s-1 and B) the resulting ECSA (derived from H+- + CO-Stripping) for GDEs with a loading of 100 µgPt cm-2. ﻿

Figure 8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in synthetic air. ﻿

Figure S4: ORR current density at a potential of 0.85 V vs. RHE of GDEs prepared with catalyst ink containing a varying percentage of ethanol in the water/ethanol solvent mixture ﻿

Figure S10: Influence of the electrolyte concentration on the potential of the utilized reversible hydrogen reference electrodes. ﻿

Figure 4: Temperature evolution of the cell electrolyte during application of ORR protocol 6a and ORR protocol 6b ﻿

Figure S9: Influence of the electrolyte concentration on the measured potentials (relating to the ORR activity) for GDEs with a loading of 100 µgPt cm-2 for low and high current densities in O2 (lA)) and synthetic air (B)). ﻿

Figure 6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured in 2 M HClO4 in O2-atmosphere by application of protocol 6b ﻿

Figure S7: Mass specific ORR activity determined by interpolation out of the recorded polarization curves shown in Figure 6 in O2-atmosphere depending on the catalyst loading. ﻿

Figure S6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured by application of protocol 6a. ﻿

Figure S8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2. A) influence on CV curves in O2-atmosphere. B) influence on the limiting current in O2 and synthetic air derived from the plateau of the respective CV curves. ﻿

NH3-TPD of Iron molybdate catalysts ﻿

Direct scale-up of rotating disc electrode (RDE) experiments for CO2 reduction ﻿

Distribution of European plastic waste composition ﻿

XPS Data of iron molybdate catalysts ﻿

VBA-Routine for the Automation of High-Troughput Process Simulation

Figure 5: Electrochemical properties of GDEs with varying catalyst loadings.

Figure S5: EIS data at vayring current density

Figure 2: Determination of the ECSA in RDE and GDE measurements

Figure 3: Influence of the solvent composition of the catalyst ink

Figure S11: Influence of the GDL type on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in O2 in 2 M HClO4.

Figure 7: Influence of the electrolyte concentration on A) CVs in N2-atmosphere at 100 mV s-1 and B) the resulting ECSA (derived from H+- + CO-Stripping) for GDEs with a loading of 100 µgPt cm-2.

Figure 8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2 in synthetic air.

Figure S4: ORR current density at a potential of 0.85 V vs. RHE of GDEs prepared with catalyst ink containing a varying percentage of ethanol in the water/ethanol solvent mixture

Figure S10: Influence of the electrolyte concentration on the potential of the utilized reversible hydrogen reference electrodes.

Figure 4: Temperature evolution of the cell electrolyte during application of ORR protocol 6a and ORR protocol 6b

Figure S9: Influence of the electrolyte concentration on the measured potentials (relating to the ORR activity) for GDEs with a loading of 100 µgPt cm-2 for low and high current densities in O2 (lA)) and synthetic air (B)).

Figure 6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured in 2 M HClO4 in O2-atmosphere by application of protocol 6b

Figure S7: Mass specific ORR activity determined by interpolation out of the recorded polarization curves shown in Figure 6 in O2-atmosphere depending on the catalyst loading.

Figure S6: A) ORR polarization curves and B) mass specific activity (MSA) in oxygen atmosphere for varying catalyst loading on the GDE measured by application of protocol 6a.

Figure S8: Influence of the electrolyte concentration on the ORR activity measured for GDEs with a loading of 100 µgPt cm-2. A) influence on CV curves in O2-atmosphere. B) influence on the limiting current in O2 and synthetic air derived from the plateau of the respective CV curves.

NH3-TPD of Iron molybdate catalysts

Direct scale-up of rotating disc electrode (RDE) experiments for CO2 reduction

Distribution of European plastic waste composition

XPS Data of iron molybdate catalysts